UKCA
Certified
Manufactured in the north east of England.
Roller garage doors supplied and fitted in Gateshead
We’re a North East manufacturer, a short drive from Gateshead along the A1. Every door is built to your exact measurements at our own factory, and most jobs across Gateshead include a free site survey and full fitting.
- 0 Year
Automation Warranty
5-year warranty on your motor and remote control unit. View full T&Cs
- 0's
Happy customers
With 30+ years of experience we have 1000's of satisfied customers.
- 0 Day
Turnaround
Build it today and have your garage door ready and delivered within 14 days.
What are you building today?
We manufacture both residential and commercial doors in-house, and we've fitted hundreds across Gateshead. That means faster lead times, lower prices, and a quality guarantee no reseller can match.
Domestic roller garage doors
Build your domestic doorGateshead’s housing follows the North East pattern closely: semi-detached and terraced houses dominate, with most garages sitting integral or attached with a standard single opening. Our 55mm and 77mm insulated aluminium gareg doors are sized and priced for exactly that kind of opening, and we’ve fitted hundreds of them across the borough.
Burglary in Gateshead runs above the national average, and the trend is upward. A well-fitted roller door is one of the most straightforward ways to harden your garage entry point.
Commercial & industrial shutters
Build your commercial doorGateshead is home to Team Valley Trading Estate, one of the largest industrial estates in the North East, and we’ve fitted shutters across it. Beyond Team Valley, we’ve worked on units at Portobello Industrial Estate, Blaydon Industrial Estate, and smaller trade premises across the borough.
Burglary in Gateshead runs above the national average. For any commercial premises with stock, plant, or equipment on site, physical security is a practical necessity. Our 75mm and 95mm galvanised steel commercial profiles are built for daily use on openings that get worked hard and need to stay locked overnight.
Trusted by homeowners & trades across the UK
We pride ourselves on exceptional manufacturing and zero-hassle installations.
Two ways to get your door in Gateshead
DIY pack
Save £100s fitting your door yourself. If you’re a competent DIYer, it’s straightforward. Most customers complete the installation in a few hours with a standard drill and a helper.
Most Gateshead garages are standard integral single openings on semi-detached houses, the same dimensions found across Tyne and Wear. No unusual headroom requirements, no awkward structural complications to plan around.
Here’s how it works:
- Fix the guide rails to the wall. Drill, plug, and secure each side.
- Slide the top box into position (two people needed) then fix to the wall.
- Connect the door to the control unit and plug in.
- Set the open and close limits on the motor.
Done. No specialist tools or equipment needed.
If you get stuck at any point, free technical support is available. Our engineers have walked many Gateshead customers through the installation over the phone.
Supply and fit
If you’d rather not get your hands dirty, and you’re within our local area, our team will survey your opening for free and fit the door for you. Gateshead is a short drive from our factory along the A1, so there’s no long callout and no waiting weeks for a slot.
Fitted across Gateshead by our own team
Our factory is on Ferryboat Lane at Sunrise Enterprise Park. Gateshead is a short drive up the A1, and it falls well within our regular fitting area. Every job is surveyed and installed by the same team that built the door. No third-party fitters, no subcontractors.
Gateshead’s residential areas cover a wide range of garage types. Post-war semi-detached estates in Low Fell, Chowdene, Lobley Hill, and Birtley account for a large share of standard integral single openings across the borough. Older terraced streets in Bensham, Saltwell, and Felling tend to have rear-access attached garages with lane access. Whickham and the newer estates on the western edge of the borough see a wider mix, including some detached properties with larger openings. We’ve fitted into most of them.
If your existing roller door needs attention rather than replacing, see our [roller shutter door maintenance and repairs] page.
Frequently Asked Questions
If you can't find the answer to your question, give us a call, we're happy to help
Yes. Gateshead falls well within our regular fitting area. We carry out a free site survey and our own team fits the door. We’re a short drive up the A1 from our factory, so booking in is straightforward.
No. Integral garages are one of the most common types we fit across Gateshead. The installation process is the same regardless of whether the garage is attached to the house or free-standing.
Yes. Team Valley is one of our regular commercial areas. We’ve fitted shutters across a range of units there, from smaller workshop spaces through to full-width industrial openings.
You only need to give us the daylight opening: brick-to-brick width and floor-to-lintel height. Our system calculates the box and guide rail dimensions from those figures. We provide a step-by-step measuring guide, and if you’re unsure before ordering, send us a photo of your opening and we’ll check it first.
Our standard turnaround is 14 days from order to door ready. For supply and fit jobs in Gateshead we’ll book the survey in quickly. If you have a specific deadline, call us and we’ll tell you whether we can meet it.
